barcodefontsoft.com

Download at WoweBook.Com in Software Use Denso QR Bar Code in Software Download at WoweBook.Com

Download at WoweBook.Com using barcode encoding for software control to generate, create qr-codes image in software applications. Microsoft Office Excel Website 6 + STATUS=0 ( ) check Software QR Code JIS X 0510 ing for ifconfig...

/sbin/ifconfig checking for ip...

/sbin/ip checking for route...

/sbin/route checking build system type...

i686-pc-linux-gnu checking host system type...

i686-pc-linux-gnu checking target system type...

i586-suse-linux checking for a BSD-compatible install...

/usr/bin/install -c checking whether build environment is sane...

(...

) Wrote: /usr/src/packages/RPMS/i586/openvpn-2.0.9-1.

i586.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.31583 + umask 022 + cd /usr/src/packages/BUILD + cd openvpn-2.

0.9 + "[" /var/tmp/openvpn-root "!=" / "]" + rm -rf /var/tmp/openvpn-root + rm -rf filelists opensuse110:/home/mfeilner #. While you receive sever al screens of output, the OpenVPN source code is configured and compiled automatically. At the end, the RPM file is placed in /usr/src/ packages/RPMS/i586/, and can be installed with RPM from the following location:. opensuse110:/home/mfeil Software qr-codes ner # rpm -Uvh /usr/src/packages/RPMS/i586/ openvpn-2.0.9-1.

i586.rpm Preparing..

. ######################################### ## [100%] 1:openvpn ######################################### ## [100%] openvpn 0:off 1:off 2:off 3:on 4:off 5:on 6:off Shutting down openvpn: done Starting openvpn: done opensuse110:/home/mfeilner #. [ 105 ]. Download at WoweBook.Com Advanced OpenVPN Installation No matter whether you h Software QR Code ISO/IEC18004 ave a RPM or Debian-based distribution, for a working repository server, there is still some organizational work that is left to be done: Configure one of your HTTP or FTP servers to act as a Debian or a SuSE repository. Howtos for both cases can be found here:. http://www.debian.org/d oc/manuals/repository-howto/repositoryhowto (Debian) and http://www.

charlescurley.com/yum/repository. html (Red Hat), or simply mirror an online repository (SuSE).

. Add your repository to Software QR Code the list of installation sources of all the systems in which you want to automatically install your software. Add a cronjob to your systems that runs aptitude update and aptitude upgrade, yum update or zypper up on a regular basis. Place your binaries on the server.

. The next time your serv ers run the software update, it will automatically download the new OpenVPN software.. Enabling Linux kernel TUN/TAP support If your kernel does not support TUN/TAP devices, you have to enable it in the kernel configuration. All modern Linux/UNIX distributions support TUN/TAP devices, so it is very unlikely for you to run into this problem. Probably, this will only usually happen if you have built your own kernel.

In this case, you will already guess how to enable TUN/TAP support. If you are not running your own kernel, but your system does not support TUN/ TAP devices, you have to build a kernel of your own. Even though this process is not that complicated, the documentation would go beyond the scope of this book.

. The process of kernel c QR Code for None ompilation is documented at http://tldp.org/ LDP/tlk/tlk.html and the Linux kernel source code can be obtained from http://www.

kernel.org/..

In short you have to do the following: Install the sources of the kernel of your choice. Change to the directory where you installed the sources. In most cases they can be found in /usr/src/linux.

Configure the kernel with one of the appropriate configuration tools such as menuconfig or Xconfig. Compile the kernel and the modules using make and make modules. Install the kernel and configure your boot manager"s settings.

. [ 106 ]. Download at WoweBook.Com 6 . If you want TUN/TAP dev ice support, you have to select the driver during the process of kernel configuration. This can be done with various tools such as Xconfig or menuconfig. The Xconfig tool is probably best if you have a workstation with a running X-Server, whereas menuconfig is best on a simple command line.

. The following three ste QR Code ISO/IEC18004 for None ps show you how to enable module support for your Linux kernel before building it. Type make menuconfig to configure the sources of your kernel, on an Ubuntu standard system with build-essential installed, you will still need the package ncurses-dev. You can navigate through menuconfig using the up/down and Tab keys.

Select an entry by highlighting it with your cursor and pressing Enter. Select the entry Device Drivers and press Enter to receive the list of available devices that the kernel source code supports..

Copyright © barcodefontsoft.com . All rights reserved.